Figure 5-71 Removing a DIMM
Step 8 Remove the DIMM from the slot. See (2) in Figure 5-71.
Step 9 Place the removed DIMM in the DIMM box.
----End
Installing a DIMM
Step 1 Wear an ESD wrist strap. For details, see 5.2 ESD Protection.
Step 2 Power
o the server. For details, see 5.4.2 Powering O the Server.
Step 3 Remove the power cables. For details, see 5.7 PSU.
Step 4 Remove the server. For details, see 5.4.4 Removing the Server and Guide Rails.
Step 5 Remove the chassis cover. For details, see 5.8 Chassis Cover.
Step 6 Remove the air duct. For details, see 5.9 Air Duct.
Step 7 Take a spare DIMM out of the DIMM box.
Step 8 Open the two
xing clips of the DIMM slot. See Figure 5-72.
Figure 5-72 Opening the
xing clips on the DIMM slot
Step 9 Align the DIMM with the DIMM slot, and insert the DIMM into the slot. See
Figure 5-73.
The two retaining clips pop up into place automatically.
TaiShan 200 Server
Maintenance and Service Guide (Model 2280) 5 Removal and Installation
Issue 04 (2020-01-16) Copyright © Huawei Technologies Co., Ltd. 133
To Next Page
Loading...
