Front Drive Backplane SAS Signal Cabling for a Server with a Screw-in RAID
Controller Card
Figure 3-16 Front drive backplane SAS signal cabling
Table 3-16 Front drive backplane SAS signal cabling
No.
Connectors and Cable Part No.
1 SAS cable for connecting PORT A (J15) of the front
drive backplane to PORT A of the RAID controller
card
04051916-01
5
2 SAS cable for connecting PORT B (J16) of the front
drive backplane to PORT B of the RAID controller
card
04051916-01
5
TaiShan 200 Server
Maintenance and Service Guide (Model 2280) 3 Internal Cabling
Issue 04 (2020-01-16) Copyright © Huawei Technologies Co., Ltd. 56
To Next Page
Loading...
