Installing the Front Bezel
Step 1 Wear an ESD wrist strap. For details, see 5.2 ESD Protection.
Step 2 Align and insert the left end of the bezel onto the server. Press the release button
and t the right end of the bezel onto the server. See Figure 5-15.
The bezel is optional and can be selected as required.
Figure 5-15 Installing the bezel
Step 3 Lock the front bezel by turning the key counterclockwise and remove the key. See
Figure 5-16.
TaiShan 200 Server
Maintenance and Service Guide (Model 2280) 5 Removal and Installation
Issue 04 (2020-01-16) Copyright © Huawei Technologies Co., Ltd. 87
To Next Page
Loading...
