Huawei TaiShan 200 23280 - Logging In to the Server over a Serial Port Using PuTTY

Figure 8-9 IRC of the server
----End
Ubuntu
Supported OSs: Ubuntu 14.04 LTS and Ubuntu 16.04 LTS
Step 1 Congure an IP address for the client (PC) to enable communication between the
client and the iBMC.
The IP address
congured and the iBMC management network port IP address
must be on the same network segment.
Step 2 Open the console and set the folder where the IRC is stored as the working folder.
Step 3 Run the chmod 777 KVM.sh command to set the permission for the IRC.
Step 4 Run ./KVM.sh to start the IRC.
A dialog box similar to the one shown in Figure 8-10 is displayed.
TaiShan 200 Server (Model 2280)
User Guide 8 Common Operations (iBMC V250 or Later)
Issue 09 (2021-01-12) Copyright © Huawei Technologies Co., Ltd. 131