Figure 5-38 Dialog box for entering the current password
Step 5 Set and enter a new password.
If the BIOS version supports the rst login password function (The BIOS does not have a
password by default, and the system prompts you to set a new password when you access
the Setup screen for the
rst time), you must set a new password before logging in to the
Setup screen.
1. In the displayed dialog box shown in Figure 5-39, press Enter.
Figure 5-39 Setting a new password
2. In the Input new password dialog box that is displayed, enter the new
password, as shown in Figure 5-40.
The password must be a string of 8 to 16 characters, and contain at least three types
of the following characters: special characters (mandatory), uppercase letters,
lowercase letters, and digits.
TaiShan 200 Server (Model 2280)
User Guide 5 Installation and Conguration
Issue 09 (2021-01-12) Copyright © Huawei Technologies Co., Ltd. 81
To Next Page
Loading...
