● Install a rat guard at the door of the equipment room.
● All cable holes should be sealed. Seal the used cable holes with sealing putty.
Seal the unused cable holes with the caps delivered with the cabinet. The
following gure shows the criteria for correct sealing with sealing putty.
● After installing the equipment, remove idle packing materials such as cartons,
foam, plastics, and cable ties from the equipment area.
1.5 Mechanical Safety
When pulling equipment out of a cabinet, be aware of unstable or heavy objects
in the cabinet to prevent injury.
General Requirements
● Repaint any paint scratches caused during equipment transportation or
installation in a timely manner. Equipment with scratches cannot be exposed
to an outdoor environment for an extended period of time.
● Before installation, ensure that the equipment is
rmly anchored to the oor
or other solid objects, such as a wall or an installation rack.
UPS2000-G-6KRTLL
User Manual 1 Safety Information
Issue 02 (2022-06-30) Copyright © Huawei Technologies Co., Ltd. 11
To Next Page
Loading...
