Huawei UPS2000-G-6KRTLL - Page 59

Name Display Description
Float charge
voltage
● Default value: 54.0 V
● When the lithium
battery
communication is
unavailable, the
value range is 51.0–
57.0 V. The value is
incremented by 0.1 V
each time you press
SELECT.
● When the lithium
battery
communication is
available, the UPS
automatically adapts
to the
oat charge
voltage based on the
connected lithium
battery model. The
value is
xed and
cannot be changed.
Low DC
cut-o
voltage
● Default value: 44.0 V
● Value range: 44.0–
46.0 V. The value is
incremented by 0.1 V
each time you press
SELECT. The battery
EOD threshold is
xed at the current
value regardless of
the load percentage.
Communications
address
The default
communications
address is 001, which is
used for the RS485
communications ports
(connect to northbound
devices). Set
dierent
communications
addresses for parallel
UPSs.
UPS2000-G-6KRTLL
User Manual 4 Control Panel
Issue 02 (2022-06-30) Copyright © Huawei Technologies Co., Ltd. 53