Figure 6-3 Enabling WiFi
Step 2 Disable mobile data on your phone. (The mobile data icon turns gray.)
Figure 6-4 Disabling mobile data
Step 3 Open the NetEco app on the mobile phone. The Select Application screen is
displayed.
Step 4 Tap UPS/SmartLi. The Connect WLAN screen is displayed. Use either of the
following methods to connect to the WiFi network.
Figure 6-5 Connect WLAN screen
● Manually connect to WLAN
a. Tap Manually connect to WLAN. The Select WLAN network screen is
displayed.
b. Select the UPS WiFi name whose last 20 digits are the same as the SN.
UPS2000-H-(6 kVA-10 kVA)
User Manual 6 Power-On Commissioning
Issue 03 (2023-08-20) Copyright © Huawei Digital Power Technologies Co., Ltd. 100
To Next Page
Loading...
