Huawei UPS2000-H-6KRTL-L

To Next Page

To Previous Page

Item Specications

Voltage range ● Upper threshold: +10%, +15%, +20%, or

+25% at 220 V AC

● Upper threshold: +10%, +15%, or +20% at

230 V AC

● Upper threshold: +10% or +15% at 240 V AC

● Lower threshold: –10%, –20%, –30%, –40%, –

50%, or –60%

Rated frequency 50 Hz/60 Hz

Frequency range 50/60±6 Hz (adjustable with a tolerance of 0.5–6

Hz, ±2 Hz by default)

Input system Supports only one power source.

Overvoltage category OVC II

Table 3-5 Output electrical specications

Item

Specications

Power system Single-phase, three-wire

Rated output voltage 220 V AC/230 V AC/240 V AC

Output power factor 1

Output voltage tolerance ±1%

Output short-circuit current ● 6K: Ipeak: 3.5 kA; Irms: 2.5 kA

● 10K: Ipeak: 4.0 kA; Irms: 3.0 kA

Voltage distortion ● Linear load THD < 1% @ Input voltage THDv

< 5%

● Non-linear load THD < 3% @ Input voltage

THDv < 5%

UPS2000-H-(6 kVA-10 kVA)

User Manual 3 Technical Specications

Huawei UPS2000-H-6KRTL-L - Page 53