Huawei UPS5000-A-30 kVA - Kva;40 Kva UPS

UPS5000-A-30 kVA & 40 kVA & 80 kVA
User Manual
3 Installation
Issue 11 (2018-12-10)
Copyright © Huawei Technologies Co., Ltd.
43

Only trained personnel are allowed to move the UPS. Use a pallet truck to transport the
UPS box secured to a wooden support to the installation position.

To prevent the UPS from falling over, secure it to a pallet truck using ropes before moving
it.

To prevent shocks or falls, move the UPS gently. Unpack it and take care to prevent
scratches. Keep the UPS steady during unpacking.

If the UPS installation environment is in poor condition and the UPS will be stored for a
long time after it is unpacked, wrap the UPS with the original plastic coat to prevent dust.
3.1.4.1 30 kVA/40 kVA UPS
Procedure
Step 1 Visually inspect the UPS appearance for shipping damage. If any shipping damage is founded,
report it to the carrier immediately.
Step 2 Use a pallet truck to transport the UPS to the installation position.
Step 3 Cut and remove the binding tape, as shown in Figure 3-6.
Figure 3-6 Removing binding tape
Step 4 Remove packing materials, as shown in Figure 3-7.