Huawei UPS5000-A-30 kVA - Routing Cables; Cable Routes

UPS5000-A-30 kVA & 40 kVA & 80 kVA
User Manual
3 Installation
Issue 11 (2018-12-10)
Copyright © Huawei Technologies Co., Ltd.
76
Figure 3-48 Preparing a cable terminal outside the cabinet
Choose an appropriate cabling route based on the actual situation. The figure is for reference only.
Step 4 Connect the cable with a crimped terminal to the corresponding copper bar.
Step 5 Clean foreign matter inside the cabinet.
----End
3.2.7 Routing Cables
3.2.7.1 Cable Routes
Context
Cable routings for only the UPS5000-A-80 kVA are elaborated in this section.
Procedure
Step 1 Remove the power distribution unit (PDU) cover, as shown in Figure 3-49.