Huawei V100R006C00 - Page 137

# Run the display als configuration interface interface-type interface-number command on
Switch A and Switch B to view the ALS configuration.
<SwitchA> display als configuration interface gigabitethernet0/0/1
-------------------------------------------------------------------------------
Interface ALS Laser Restart Interval(s) Width(s)
Status Status Mode
-------------------------------------------------------------------------------
GigabitEthernet0/0/1 Enable Off Auto 200 3
-------------------------------------------------------------------------------
<SwitchB> display als configuration interface gigabitethernet0/0/1
-------------------------------------------------------------------------------
Interface ALS Laser Restart Interval(s) Width(s)
Status Status Mode
-------------------------------------------------------------------------------
GigabitEthernet0/0/1 Enable Off Auto 200 3
-------------------------------------------------------------------------------
----End
Configuration Files
l Configuration file of Switch A
#
sysname SwitchA
#
interface GigabitEthernet0/0/1
als enable
als restart pulse-interval 200
als restart pulse-width 3
#
return
l Configuration file of Switch B
#
sysname SwitchB
#
interface GigabitEthernet0/0/1
als enable
als restart pulse-interval 200
als restart pulse-width 3
#
return
Quidway S5700 Series Ethernet Switches
Configuration Guide - Device Management 9 ALS Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
128