Checking the Status of a Specified Interface
1. Run:
display interface interface-type interface-number
The status of a specified interface is displayed.
Information about the status of an interface contains the running status, basic configuration of
the interface, and statistics of the transmission of packets.
Checking the Status of an Interface in the Current Interface View
1. Run:
system-view
The system view is displayed.
2. Run:
interface interface-type interface-number
The interface view is displayed.
3. Run:
display this interface
The status of the interface in the current interface view is displayed.
Quidway S5700 Series Ethernet Switches
Configuration Guide - Device Management 4 Using display commands to check the status of the device
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
43
To Next Page
Loading...
