Huawei V100R006C00 - Optional) Naming the Information Channel; Defining the Information Channel; Optional) Configuring the Timestamp for the Output Information

6.2.3 (Optional) Naming the Information Channel
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
info-center channel channel-number name channel-name
Channels are specified to send debugging information, logs, and traps.
----End
6.2.4 Defining the Information Channel
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
info-center source { module-name| default } channel { channel-number | channel-
name } [ { debug | log | trap } { state { off | on } | level severity }
*
]
*
A module (or modules) is specified to send debugging information, logs, or traps to the
information channels.
NOTE
Run the undo info-center source { module-name | default } channel { channel-number | channel-
name } command to disable the unnecessary modules and select one or more modules to send information
to the information channels.
----End
6.2.5 (Optional) Configuring the Timestamp for the Output
Information
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
info-center timestamp debugging { boot | none | { short-date | format-date | date }
[ precision-time { tenth-second | second } ] }
Quidway S5700 Series Ethernet Switches
Configuration Guide - Device Management 6 Monitoring the Device Through the Information Center
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
56