Huawei V100R006C00 - 6.3 Sending Information to the Information Center

The format of the timestamp is set for the debugging information.
Step 3 Run:
info-center timestamp { trap | log } { boot | none | { short-date | format-date |
date } [ precision-time { tenth-second | millisecond } ] }
The format of the timestamp is set for the output logs or traps information.
----End
6.2.6 Checking the Configuration
Run the following commands to check the previous configuration.
Action Command
Check the configuration of the
channel.
display channel [ channel-number | channel-name ]
Check the information recorded by
the information center.
display info-center [ statistics ]
Check the information in the log
buffer of the memory.
display logbuffer [ level severity | module module-
name | size value | slot slot-id ]
*
Check the summary of the
information in the log buffer.
display logbuffer summary [ level severity | slot slot-
id ]
*
Check the information in the trap
buffer of the memory.
display trapbuffer [ size value ]
6.3 Sending Information to the Information Center
This section describes how to send information to the specified direction.
6.3.1 Sending Information to the Console
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
info-center console channel { channel-number | channel-name }
Information is sent to the console.
Step 3 Run:
quit
Return to the user view.
Quidway S5700 Series Ethernet Switches
Configuration Guide - Device Management 6 Monitoring the Device Through the Information Center
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
57