Information timestamp setting:
log - date, trap - date, debug - boot
Sent messages = 499, Received messages = 499
IO Reg messages = 0 IO Sent messages = 0
4. Enable the terminal display of the console.
# Enable the terminal display of the console. Enable the corresponding terminal display to
check the information type as required.
[Quidway] info-center console channel 0
[Quidway] quit
<Quidway> terminal monitor
Info:Current terminal monitor is on
<Quidway> terminal logging
Info:Current terminal logging is on
Configuration Files
#
info-center source default channel 2 log level debugging state on trap state off
debug state off
info-center loghost source vlanif 10
info-center loghost 1.0.0.1
#
#
vlan batch 10
#
interface vlanif10
ip address 2.0.0.1 255.0.0.0
#
interface GigabitEthernet0/0/1
port hybrid untagged vlan 10
#
return
Quidway S5700 Series Ethernet Switches
Configuration Guide - Device Management 6 Monitoring the Device Through the Information Center
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
63
To Next Page
Loading...
