EasyManua.ls Logo

Huawei V200R001C01 - 5.4 DCC Troubleshooting

Huawei V200R001C01
391 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Total number of Routes :
17
Destination/Mask Nexthop Flag TimeStamp Interface
TunnelID
7.7.7.1/32 7.7.7.1 HU t[2917] S2/0/0:0
0x0
7.7.7.255/32 127.0.0.1 HU t[2907] InLoop0
0x0
7.7.7.2/32 127.0.0.1 HU t[2907] InLoop0
0x0
50.1.1.255/32 127.0.0.1 HU t[2519] InLoop0
0x0
50.1.1.1/32 127.0.0.1 HU t[2519] InLoop0
0x0
192.168.0.255/32 127.0.0.1 HU t[495] InLoop0
0x0
192.168.0.23/32 127.0.0.1 HU t[495] InLoop0
0x0
36.1.1.255/32 127.0.0.1 HU t[492] InLoop0
0x0
36.1.1.2/32 127.0.0.1 HU t[492] InLoop0
0x0
255.255.255.255/32 127.0.0.1 HU t[484] InLoop0
0x0
127.255.255.255/32 127.0.0.1 HU t[484] InLoop0
0x0
127.0.0.1/32 127.0.0.1 HU t[484] InLoop0
0x0
127.0.0.0/8 127.0.0.1 U t[484] InLoop0
0x0
36.1.1.0/24 36.1.1.2 U t[492] VT3
0x0
192.168.0.0/24 192.168.0.23 U t[495] GE0/0/0
0x0
50.1.1.0/24 50.1.1.1 U t[2519] S2/0/1:15
0x0
7.7.7.0/24 7.7.7.2 U t[2907] S2/0/0:0
0x0
In the command output, the local IP address is 7.7.7.2, the peer IP address is 7.7.7.1,
and the information in bold indicates the correct routing entry.
– If the preceding routing entry is not displayed, configure this route.
– If the preceding routing entry is displayed, go to step 7.
7. Collect the following information and contact Huawei technical support personnel.
– Results of the preceding troubleshooting procedure
– Configuration files, log files, and alarm files of the device
l In the scenario where a PVC group is configured:
1. Check that the PVC group status of FR interfaces on both ends is Active.
Run the display fr pvc-group command to check the PVC group status.
[Huawei-Serial2/0/0:0]display fr pvc-
group
PVC-GROUP-name State TosType INARP Interface Type
PhyStatus
1 Active PRECEDENCE Enable Serial2/0/0:0 DTE
Up
– If the PVC group status is not displayed as Active, check the physical status of the
interfaces.
– If the PVC group status has been displayed as Active, go to step 2.
Huawei AR2200-S Series Enterprise Routers
Troubleshooting 5 WAN
Issue 01 (2012-01-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
90

Table of Contents

Related product manuals