Huawei V300R005 - Example for Logging in to the Router through AAA

5 User Management
Quidway NetEngine80
Configuration Guide - Basic Configurations
5-32 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2009-12-20)
#
user-interface con 0
user-interface aux 0
user-interface vty 0
user privilege level 2
set authentication password simple huawei
idle-timeout 30 0
user-interface vty 1 4
#
return
Configuration Files
#
sysname Quidway
#
interface GigabitEthernet6/0/0
#
interface NULL0
#
aaa
authentication-scheme default
#
authorization-scheme default
#
accounting-scheme default
#
domain default
#
#
user-interface con 0
user-interface vty 0
user privilege level 2
set authentication password simple huawei
idle-timeout 30 0
user-interface vty 1 4
#
return
5.8.2 Example for Logging In to the Router Through AAA
Networking Requirements
The COM port of the PC and the console port of the router are connected.
Configure the priority of VTY0 to be 2, perform AAA authentication on the user that logs in
through VTY 0. The login user must enter the username "Huawei" and the password
"Huawei".
After login, if the user does not operate the router within 30 minutes, the connection with the
router is disabled.
Configuration Roadmap
The configuration roadmap is as follows: