8 FTP, TFTP and XModem
Quidway NetEngine80
Configuration Guide - Basic Configurations
8-4 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2009-12-20)
No. Procedure
3 Configuring the Timeout Period
4 Configuring the Local Username and the Password
5 Configuring Service Types and Authorization Information
6 Checking the Configuration
8.2.2 Configuring the source address of FTP server
Do as follows on the router that serves as the FTP server:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ftp server-source {-a source-ip-address | -i { interface-name | interface-type
interface-num } }
The source address of FTP server is started.
----End
8.2.3 Enabling the FTP Server
Do as follows on the router that serves as the FTP server:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ftp server enable
The FTP server is started.
----End
8.2.4 Configuring the Timeout Period
Do as follows on the router that serves as the FTP server:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
To Next Page
Loading...
