Huawei V300R005 - Enabling the Stelnet Service; Enabling the SFTP Service; Optional)Enabling the Earlier Version-Compatible Function

Quidway NetEngine80
Configuration Guide - Basic Configurations 9 Telnet and SSH
Issue 04 (2009-12-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9-17
No. Procedure
6 (Optional)Configuring the Interval for Updating the Key Pair on the SSH Server
7 Checking the Configuration
9.4.2 Enabling the STelnet Service
Do as follows on the router that serves as an SSH server:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
stelnet server enable
The STelnet service is enabled.
----End
9.4.3 Enabling the SFTP Service
Do as follows on the router that serves as an SSH server:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
sftp server enable
The SFTP service is enabled.
----End
9.4.4 (Optional)Enabling the Earlier Version-Compatible Function
Do as follows on the router that serves as the SSH server:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ssh server compatible-ssh1x enable
The earlier version-compatible function is enabled.