Quidway NetEngine80
Configuration Guide - Basic Configurations 9 Telnet and SSH
Issue 04 (2009-12-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9-23
Kex : diffie-hellman-group1-sha1
Service Type : stelnet
Authentication Type : password
9.6 Configuring the SFTP Client Function
9.6.1 Establishing the Configuration Task
Applicable Environment
SFTP enables users to log in to the device from the secure remote end to manage the file. This
improves the security of data transmission for the remote end to update its system. Meanwhile,
the client function enables you to log in to the remote device through SFTP for the secure file
transmission.
Pre-configuration Tasks
Before connecting the SFTP client to the SSH2 server, complete the following tasks:
z
Creating the local RSA key pair on the SSH server
z
Configuring the SSH client on the SSH server
z
Enabling the SFTP service on the SSH server
Data Preparation
To connect the SFTP client to the SSH2 server, you need the following data.
No. Data
1 Name of the SSH server
2 Number of the port monitored by the SSH server
3 Preferred encrypted algorithm from the SFTP client to the SSH server
4 Preferred encrypted algorithm from the SFTP server to the SSH client
5 Preferred HMAC algorithm from the SFTP client to the SSH server
6 Preferred HMAC algorithm from the SFTP server to the SSH client
7 Preferred algorithm of key exchange
8 Name of the egress
9 Source address
10 Directory name
11 File name
To Next Page
Loading...
