Huawei V300R005 - Configuring the First-Time Authentication on the SSH Client; Configuring the SSH Client to Assign the RSA Public Key to the SSH Server

9 Telnet and SSH
Quidway NetEngine80
Configuration Guide - Basic Configurations
9-24 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2009-12-20)
Configuration Procedures
To configure the function of SFTP client, you need to take the following steps.
No. Procedure
1
Configuring the First-Time Authentication on the SSH Client
2 Configuring the SSH Client to Assign the RSA Public Key to the SSH Server
3 Enabling the SFTP Client
4 (Optional) Managing the Directory
5 (Optional) Managing the File
6 (Optional)Displaying the SFTP Client Command Help
7 Checking the Configuration
9.6.2 Configuring the First-Time Authentication on the SSH
Client
Do as follows on the router that serves as an SSH client:
Step 1 Run:
system-view
The system view is displayed.
ssh client first-time enable
Enable the first authentication of the SSH client.
----End
9.6.3 Configuring the SSH Client to Assign the RSA Public Key to
the SSH Server
Do as follows on the router that serves as an SSH client:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ssh client servername assign rsa-key keyname
Assign a public key to the SSH server.
----End