10 Router Maintenance
Quidway NetEngine80
Configuration Guide - Basic Configurations
10-8 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2009-12-20)
If the electronic label should be backed up to a specified FTP server, run the backup elabel ftp host
filename username password [ slot-id ] command.
10.5 Configuring a Cleaning Cycle for the Air Filter
10.5.1 Establishing the Configuration Task
Applicable Environments
You need to clean the air filter after the air filter has been running for a period of time.
Preconfigured Tasks
None.
Data Preparations
To configure a cleaning cycle for the air filter, you need the following data.
No. Data
1
Cleaning cycle of the air filter
Configuration Procedures
No. Procedure
1 Configuring a Checking of the Air Filter based on the Device Temperature
2 Configuring a Cleaning Cycle for the Air Filter
3 Remonitoring the Cleaning Cycle of the Air Filter
4 Checking the Configuration
10.5.2 Configuring a Checking of the Air Filter based on the
Device Temperature
Do as follows on the router:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
dustproof check-auto
To Next Page
Loading...
