11 System Software Upgrade
Quidway NetEngine80
Configuration Guide - Basic Configurations
11-6 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2009-12-20)
Step 2 Run:
startup system-software file-name slave-board
The system software is specified for starting the slave MPU the next time.
----End
11.3.3 (Optional) Configuring PAF Files
Do as follows on the router to be upgraded:
Step 1 Run:
startup paf file-name
The PAF file is specified for the main MPU after the next startup.
Step 2 Run:
startup paf file-name slave-board
The PAF file is specified for the slave MPU after the next startup.
Step 3 Run:
startup license file-name
The License file is specified for the main MPU after the next startup.
Step 4 Run:
startup license file-name slave-board
The License file is specified for the slave MPU after the next startup.
----End
11.3.4 (Optional) Configuring Patch Packages
To upgrade the version of the system software, you need to perform the following steps to specify the
patch files.
Do as follows on the router to be upgraded:
Step 1 Run:
startup patch file-name
Specify the patch files for the main MPU after next startup.
Step 2 Run:
startup patch file-name slave-board
Specify the patch files for the slave MPU after next startup.
Step 3 Run:
patch-state run { all | slot slot-id }
To Next Page
Loading...
