Quidway NetEngine80
Configuration Guide - Basic Configurations 4 Basic Configuration
Issue 04 (2009-12-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-3
Configuration Procedures
No. Procedure
1 Switching the Language Mode
2 Configuring the Equipment Name
3 Configuring the System Clock
4 Configuring the Header Text
5 Configuring Command Levels
4.2.2 Switching the Language Mode
Do as follows on the router:
Step 1 Run:
language-mode { chinese | english }
The language mode is switched.
----End
By default, the English mode is used. The help information on the router can be in English
and in Chinese. When you need the help information in Chinese, run this command to switch
the language mode.
4.2.3 Configuring the Equipment Name
Do as follows on the router:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
sysname host-name
The equipment name is set.
----End
You can change the name of the router that appears in the command prompt.
4.2.4 Configuring the System Clock
Do as follows on the router:
Step 1 Run:
clock datetime HH:MM:SS YYYY/MM/DD
To Next Page
Loading...
