Enable or disable ash: Flash is used to provide extra lighting for taking photos in low light
conditions. From the viewnder, touch
Auto: The camera automatically enables or disables ash depending on the ambient light level.
l Off: Disable ash.
l On: Enable ash.
l Always on: Flash is always on while you are in the viewnder.
Enable geolocation: Records your geographic location when you take a picture to allow you to
search through your pictures by location. From the viewnder, swipe left to enter the settings menu
and enable GPS tag.
Use Camera to Record Videos
Besides taking pictures, you can also use the camera to capture high resolution videos with sound.
Record a video: Open Camera and touch to switch to video mode. Touch to start
recording a video.
Take a picture while recording a video: You can touch
when recording a video to take a
picture.
Camera
32