To Next Page
J
joannahowellAug 14, 2025
Why is the cutting quality weak with my HUAYUAN LGK-200IGBT?
- Mmichael07Aug 14, 2025
Weak cutting quality with your HUAYUAN Cutter can stem from several factors: * Incorrect gas pressure: Adjust the gas pressure to the appropriate level. * A full air filter regulator cup: Regularly drain water from the air filter regulator cup. * Excessively thick workpiece: Ensure the workpiece thickness is within the cutter's specified quality cutting range. * Damaged torch electrode and nozzle: Replace the electrode and nozzle. * Incorrect plasma arc angle: Adjust the torch angle to ensure the plasma arc is perpendicular to the workpiece. * Inappropriate cutting speed: Adjust the cutting speed.
General
