Need help?Do you have a question about the Huber Engineered Woods Zip System Sheathing and Tape and is the answer not in the manual?
General| Width | 4 feet |
|---|---|
| Product Type | Structural Sheathing |
| Material | Engineered Wood |
| Thickness | 7/16 inch |
| Length | 8 feet |
| Panel Coverage | 32 sq ft |
| Water Resistance | Yes, integrated water-resistive barrier |
| Air Barrier | Yes |
| Code Compliance | ESR-1474 |
| Tape Width | 3.75 inches |
| Tape Roll Length | 90 ft |
| Warranty | 30 years |
Follow all OSHA regulations and safety practices during installation and construction.
Description of ZIP System sheathing panels, their composition, and application as a building envelope solution.
Details on available ZIP System sheathing panel dimensions, thickness, and performance categories.
Information on available ZIP System tape widths for sealing seams and flashing.
Guidelines for proper fastener type, spacing, and placement for ZIP System sheathing installation.
Best practices for storing and handling ZIP System sheathing panels to maintain quality and prevent damage.
Details on fasteners, compatible substrates, sealants, and general installation compatibility for ZIP System.
Guidance on using ZIP System tape and fluid for flashings, and techniques to avoid tape wrinkling.
Instructions for parapet wall termination and a list of common and recommended installation tools.
Important restrictions and limitations for using ZIP System sheathing products in various applications.
General outline of the roof installation process for ZIP System sheathing, emphasizing safety and manufacturer recommendations.
Guidelines for orienting ZIP System panels relative to framing and staggering panel edge seams.
Specifics on fastener spacing and application for ZIP System sheathing on roof framing members.
Detailed recommendations for panel spacing, edge profiles, and fastener placement for roof sheathing.
Instructions for applying ZIP System tape to roof sheathing seams, including best practices and reminders.
Approved roof coverings for use with ZIP System sheathing and installation considerations.
Requirements for panel edge support (H-clips) for 7/16" ZIP System sheathing on wider on-center spacing.
Method for taping roof valleys using 6" ZIP System tape for optimal protection.
Method for taping roof valleys using two continuous pieces of 3-3/4" ZIP System tape.
Procedure for applying ZIP System tape to roof hips and ridges for temporary weather protection.
Steps for installing drip edge and taping it to the ZIP System sheathing for proper edge protection.
Steps for flashing around plumbing vents using ZIP System tape to ensure a watertight seal.
Guidance on using toe boards for installer assistance and sealing fastener holes.
Steps for flashing chimney crickets using ZIP System tape to integrate with sheathing.
Information on the use of ice and water barriers in conjunction with ZIP System sheathing.
To Next Page