Organization > Site > Networks
1. Log in the Hublet Manager and go to Site > Networks
2. Click Add and insert the network information: SSID (name of the network), Visibility (Broadcast/Hidden) and
Security mode (Open, WPA, WPA2, WEP). If using WPA, WPA2, WEP networks, insert the password also.
3. Click Save and the network will appear on the list of allowed networks.
4. If you are using multiple networks you can choose the priority by dragging and dropping the networks in the
desired order.
The Networks tab let’s you define the allowed networks for your tablets. Hublet supports Open, WPA, WPA2
and WEP networks. The network can be Hidden or visible. Here’s how you add networks to the Hublet
Manager:
25
View: Hublet Manager > Networks after adding a new network
View: Hublet Manager > Networks > Add
View: Hublet Manager > Networks
13/03/2019
To Next Page
Loading...