Need help?Do you have a question about the Hui Zhou Boshijie Technology RC10 and is the answer not in the manual?
General| Model | RC10 |
|---|---|
| Manufacturer | Hui Zhou Boshijie Technology |
| Operating Frequency | 433MHz |
| Operating Voltage | 3.3V-5.5V |
| Interface | UART |
| Operating Temperature | -40°C to +85°C |
| Category | Wireless modules |
Provides a general introduction to the RC10 module, its features, and capabilities.
Details product features, power voltage, working frequency, and GPRS data characteristics.
Defines pins related to power supply, including VBAT, VBAT1, VIO28, VRTC, GPS_RTC, and GND.
Details pins for serial communication, including UTXD1, URXD1, GNSS_UART_TX, GNSS_UART_RX, UTXD3, and URXD3.
Specifies pins for SIM card interface: SIM1_SCLK, SIM1_SRST, SIM1_SIO, and VSIM1.
Describes the module boot pin: PWRKEY.
Lists pins for audio input and output: MIC_NO, MIC_P0, SPKP1, SPKN1.
Details pins for Analog-to-Digital conversion: AD0 and AD1.
Specifies pins for GSM and GPS antennas: ANT1 and ANT2.
Details pins for USB interface: VBUS, USB_DM, and USB_DP.
Defines pins for I2C communication: SCL and SDA.
Lists General Purpose Input/Output pins (GPIO 0-12) with their voltage limits.
Covers miscellaneous pins like KCOLO and NC.
Important usage notes and considerations for the RC10 module.
Visual representation of the module's internal connections and components.
Physical layout and pin numbering of the module on a printed circuit board.
Details device compliance with FCC Part 15 rules regarding interference.
Details RF exposure compliance and recommends minimum separation distance.
To Next Page