Navigation Menu Tab
150
GPS Receiver Override
(Advanced)
Settings: Internal, External, Auto; Default = Auto
GPS Receiver Override allows you to set which GPS receiver to use if you have multiple GPS
receivers plugged into the system. These multiple GPS receivers may be internal, external, or
connected via the InterLink™. If you select Auto, your unit will select a GPS receiver
automatically.
NOTE: If only one GPS receiver is plugged into your system, then Auto will be the only option shown.
SI Navigation
(Side Imaging® models only [1198c SI])
Settings: Off, On; Default = On
SI Navigation controls how the boat icon is displayed in Side Imaging® Views. If SI Navigation
is turned on, the boat icon indicates the direction the boat needs to turn to reach the next
waypoint during navigation. The boat icon color will also change to orange.
If SI Navigation is turned Off, the boat icon will not change during navigation although you can
still mark waypoints and start navigation from a Side Imaging® View. See Views: Side Imaging®
View and Introduction to Navigation for more information.
To Next Page
Loading...
Need help?
General
