W
William WallaceAug 4, 2025
What to do if HumminGuru Ultrasonic Jewelry Cleaner overheated?
- JjasonwilliamsAug 4, 2025
If the HumminGuru Ultrasonic Jewelry Cleaner overheats, turn off the machine and allow it sufficient space to cool off.
To Next PageTo Next PageWhat to do if HumminGuru Ultrasonic Jewelry Cleaner overheated?
If the HumminGuru Ultrasonic Jewelry Cleaner overheats, turn off the machine and allow it sufficient space to cool off.
What to do if HumminGuru Ultrasonic Jewelry Cleaner power adapter is damaged?
If the power adapter of your HumminGuru Ultrasonic Jewelry Cleaner is damaged, it must be replaced by the manufacturer to avoid potential hazards.
General| Model | HG01 |
|---|---|
| Type | Ultrasonic Jewelry Cleaner |
| Tank Capacity | 600 ml |
| Ultrasonic Frequency | 40 kHz |
| Timer | Yes |
| Material | Plastic |
| Voltage | 100-240V |
Details hazards and precautions related to the power adapter.
Highlights dangers and provides warnings for the machine's operation and placement.
Identifies and labels all parts of the ultrasonic vinyl record cleaner.
Explains how to adjust the drying duration for optimal results.
Details the different cleaning and drying modes available on the control panel.
Explains water level guides, capacity, and important usage cautions.
Describes the maintenance tool's uses: filter removal, wheel replacement, and water level indication.
Step-by-step instructions on using the maintenance tool to check water levels.
Step-by-step guide for setting up the HumminGuru ultrasonic vinyl record cleaner.
Instructions on inserting vinyl records and selecting operational modes.
Details the automatic cleaning and drying cycle with two settings.
Explains the two settings for cleaning only mode for different record conditions.
Details the two available drying time settings for the machine.
Explains the meaning of different light indicators for machine status and errors.
Step-by-step guide on how to drain and rinse the water tank and its components.
Instructions on cleaning the water basin filter and wiping the water basin.
Guide on how to check and replace the air filter for proper machine functioning.
Instructions for replacing the water filter to filter out water residue.
Step-by-step guide for removing and replacing the rotation wheels.
Procedures for safely storing the record cleaner when not in use.
Solutions for issues like the machine not starting or the record not turning.
Advice on preventing the record label from getting wet during cleaning.
Addresses filter clogs, draining issues, drying problems, smells, and tank removal.
Lists key technical details like model, power, dimensions, and frequency.
Outlines warranty coverage, exclusions, and limitations on damages.