QUICK OPERATOR’S GUIDE
ON
Press the POWER key to turn on
the Humphree system.
OFF
To turn off the Humphree system
Press and hold the POWER key for more than
2 seconds, then the Turn Off System menu will
be shown.
Press OFF to turn off the system.
CLEANING
A cleaning function is automatically activated
when the system is turned off. The Interceptors
will make a full stroke every 24 hours.
Main screen information
Additional languages are available at
www.humphree.com
Interceptor
position
starboard
GPS speed
AUTO function
position
The AUTO functions will
change the Interceptor position
automatically.
Interceptor
position port
Trim angle
Status bar
List angle/Set list
Function indicator
Auto functions
ON/OFF
(Functions are off on this screen)
Function keys
Trim / List keys
Enter & Menu key
Center key
Power, Dimmer &
Exit key
Rudder signal/
steering position
To Next Page
Need help?
General
