How to fix Hunleigh AKRON POPULAR 9221A actuator that will not work?
If the Hunleigh Personal Care Products actuator isn't working, first ensure that the main power supply is properly connected. If it still fails to operate, check the fuse in the socket and replace it if necessary. Finally, verify that the hand or foot switch is fully inserted into the actuator.
What to do if Hunleigh Personal Care Products actuator runs when the foot bar is not pressed?
If the Hunleigh Personal Care Products actuator runs when the foot bar switch is not pressed, it might be due to an out-of-balance system. To resolve this, vent the air tube by disconnecting it from the actuator and then reconnect it.
General| Brand | Hunleigh |
|---|---|
| Model | AKRON POPULAR 9221A |
| Category | Personal Care Products |
| Language | English |
Defines the terms 'Warnings' and 'Cautions' for user understanding.
Lists crucial safety precautions for operating the couch.
Step-by-step guide for adjusting the couch's foot mechanism.
Specific installation guidance for electric couch models.
Instructions for operating couch elevation via pedals or switches.
How to operate hydraulic lift controls.
How to operate electric lift controls.
Usage guide for the foot bar switch.
Procedure for locking wheels and using castors safely.
Information on the breathing hole and its plug.
How to adjust the head and foot sections of the couch.
Using the lever to alter head section angles.
Using the lever to alter foot section angles.
Procedure for adjusting arm rests.
Instructions for raising and lowering cot sides.
How to load and use the paper roll holder.
Steps to adjust gynae stirrups for patient comfort.
How to adjust gynae troughs.
Instructions for adjusting Cyriax horns.
Procedure for adjusting the arm support.
Guide to fitting the horn into the designated hole.
How to adjust the lean back frame.
Ensuring correct strap placement on fixation rails.
Critical safety steps before performing any maintenance.
Head, foot, width, length, and load specifications for models.
Information on elevation control types and model configurations.
Electrical specifications including actuator, fuses, current, and power.
To Next Page