Need help?Do you have a question about the Hunter Marine H36 and is the answer not in the manual?
General| Engine | Yanmar 3GM30F |
|---|---|
| Holding Tank Capacity | 30 gal |
| Horsepower | 27 hp |
| Displacement | 13900 lbs / 6305 kg |
| Water Capacity | 75 gal |
| LWL | 30.5 ft |
Provides a pre-launch inspection checklist.
Details engine pre-start checks.
Details generator pre-start checks.
Introduces the limited warranty terms and coverage.
Details the one-year warranty for manufactured parts.
Outlines the five-year warranty for hull structure.
Lists circumstances that void warranties.
Emphasizes owner's responsibility for safety and familiarization.
Provides general information on safe boat operation.
Explains marine traffic laws and navigation rules.
Lists essential safety equipment required by law.
Describes different types of PFDs and their requirements.
Discusses the dangers of CO and its accumulation.
Provides educational info on CO relative to boats.
Lists symptoms of CO poisoning.
Explains how CO affects the body.
Details emergency actions for CO victims.
Offers tips to reduce CO buildup.
Stresses regular inspection of exhaust and engine systems.
Discusses installation and maintenance of CO detectors.
Warns against operating under the influence.
Provides guidance on responding to fires aboard.
Covers types of distress signals and their use.
A checklist to ensure fuel safety before boarding.
Details the fuel tank, its location, and inspection.
Details fuel lines, hoses, and inspection.
Explains the operation of fuel shutoff valves.
Discusses the function of fuel filters.
Provides guidelines for safely fueling the boat.
Covers the LPG system, its hazards, and first aid.
Provides guidance on safe handling and storage of LPG.
Lists personal protective measures for LPG.
Details components involved in boat movement.
Discusses propeller selection, maintenance, and replacement.
Describes the propeller shaft material and construction.
Details the propeller shaft support struts and their maintenance.
Explains the shaft log and stuffing box function.
Reiterates the importance of shaft alignment.
Covers the boat's steering system components.
Details the rack and pinion steering setup.
Describes the rudder construction and maintenance.
Explains seawater intakes and skin fittings.
Describes the windlass for anchoring.
Details the anchor type and its use.
Lists the components of the DC electrical system.
Details components related to power supply.
Explains the battery selector switch and breakers.
Describes how the boat batteries are charged.
Details the DC control panel and its functions.
Explains bilge pump operation and float switches.
Covers power for the optional windlass.
Discusses the installed CO monitors and their safety.
Details the automatic fire suppression system.
Details connecting and turning on shore power.
Step-by-step guide for shore power connection.
Steps to safely disconnect shore power.
Covers the boat's generator and AC power.
Steps for connecting generator power.
Provides procedures for generator startup.
Details the procedure for shutting down the generator.
Details the inverter's function and modes.
Provides a procedure for sanitizing the water system.
Details strainer cleaning procedures.
Explains the macerator pump's function and operation.
Covers the boat's toilet system and MSD.
Details the electric head system components and operation.
Discusses bilge pump operation and maintenance.
Discusses holding tank cleaning and pumping.
Importance of engine maintenance and operation.
Advises monitoring oil pressure and water temperature.
Discusses causes and prevention of hydrolock.
Warns about carbon monoxide from exhaust.
Provides solutions for engine and transmission issues.
Details the mast and the B&R rig design.
Provides instructions for reefing sails.
Step-by-step guide for reefing.
Guidance on rigging inspection and maintenance.
Procedures for handling strong fuel fumes.
Steps to start the boat's engines.
Steps to prepare for getting underway.
Instructions on tuning the B&R rig.
Emphasizes the importance of emergency preparedness.
Details the automatic fire extinguisher system.
Guidance on maintaining mechanical systems.
Checking and replenishing engine oil.
Checking and adding engine coolant.
Inspecting engine and generator exhaust systems.
Information on checking and replacing fuel filters.
Safety and maintenance for boat batteries.
General guide for boat storage and lifting.
Guidelines for safely lifting the boat.
Checklist before placing the boat in the water.
Checks to perform after launching the boat.
A schedule for routine maintenance tasks.
To Next Page
