Hunter 44033-01 44272 - Menu Options and Configuration

44033-01 • 05/11/2010
28
6
Features
Menu Options
Under your Menu options you have the ability to reset your lter counter,
change your day/time settings, and change rst and second stage spans.
To change each setting, you will need to hit the
Next
button to move through
each feature.
To access these options:
1. Press the
Menu
button.
2. If you need to reset your lter indicator on the screen use the or
buttons to select “Y”. If you need to make no other changes press
Done/
Home
to return to the home screen, otherwise press
Next
. The
Next
button
will advance you through this option if you do not need to reset the
lter counter. If you select “N” then the lter counter will not be reset
and may continue to ash “Filter” on the screen if it was active before
entering this menu.
3. Next you are given the option of changing your day/time. You will
use the same instructions as on 10 to change these settings. The and
buttons change the day of week, am/pm, hour, and minutes. The
Next
or
Back
buttons browse through each option. Press
Next
to advance
to your next feature from the minutes adjustment.
Note: If you do not need to change your time/day, just use the
Next
button until the screen shows updated and advances you to the
next option.