41718-01 01/28/2008
18
Insert the strain relief bracket’s dog-leg tab so that
it hooks over the lip of the motor. Reinstall the
strain relief bracket screw.
Position the strain relief bracket under the motor as shown.
Remove the strain relief bracket screw.
Install 2 Max 60 watt A-15 bulbs (Not Included).
Attach thumbscrews.
WARNING: To reduce the risk of electrical shock,
all 4 thumbscrews MUST be properly installed.
Align posts A, B, C and D (stamped into motor housing)
with posts A, B, C and D (stamped into light fixture).
Slide light fixture over posts.
028_41718_EngS_1.28.08_Arial.indd 18 1/28/08 10:47:48 AM
To Next Page
Loading...
