Hunter Techne - Glass Cover and Bulb Installation; Glass Fall Hazard Warning

9 8
Installation – Light Kit
GLASS FALL HAZARD
To prevent SERIOUS INJURY or DEATH, make sure that glass
is properly secured.
WARNING
Installation – Glass Cover
Turn Power ON, breaker and main switch.
ON
ON
OFF
ON
OFF
OFF OFF
ONONON
OFF
3f
3e
Install a bulb into each of the sockets. When necessary,
replace with bulbs of same wattage.
Remove the socket rings from the sockets. Install the glass
onto the sockets. Install the socket rings onto the sockets.
Tighten them by turning clockwise by hand.
x4
x4
Glass
Socket
Ring
Socket
Bulb