15
42709-01 • 02/26/10 • Hunter Fan Company
11 • Operating the Remote Control and Mounting the Holder
11-1. e remote transmitter has individual buttons for turning the fan
o and on and controlling the light and fan speed.
11-2. For best operation, start the fan by pressing high, then select your
desired speed.
11-3. e light button turns the light on to full brightness. Push the
light button again to turn o the light.
11-4. e reversing switch reverses the direction of the fan.
11-5. Press the OFF button to turn the fan o.
11-6. You can mount the remote holder to any toggle switch plate with
the screws already in the switch plate. Or, you can simply mount
the remote holder on the wall.
11-7. is product includes one 12-volt type 23A, MN-21 battery for
use with the remote control transmitter. Please contact your local
battery recycling center for proper battery disposal information.
Step 11-6
Fan Light
Fan Speed
High
Fan Speed
Medium
Fan Speed
Low
Fan O
Reversing Switch
Steps 11-1 – 11-5
Step 11-7
To Next Page
Loading...
