Huntleigh Sonicaid Team 3 Series - 12 Using Team 3 with a CRS System; Using Team 3 with Sonicaid Fetalcare and Sonicaid Centrale; Connecting Team 3 to Sonicaid Fetalcare and Sonicaid Centrale

77
Using Team 3 with a CRS system
12. Using Team 3 with a CRS System
The Team 3 can be connected to the following PC-based Central Record
Systems:
• Sonicaid FetalCare
• Sonicaid Centrale
The Team 3 has been validated for use with the listed Huntleigh
Software systems. Other manufacturers' systems using the
industry standard HP50 / Philips communications protocol
should also work but may not have been validated - contact
Huntleigh for details.
12.1 Using Team 3 with Sonicaid FetalCare and Sonicaid
Centrale
12.1.1 Connecting Team 3 to Sonicaid FetalCare and
Sonicaid Centrale
1. Connect the Sonicaid FetalCare connecting lead to the RS232 connector on
the rear of Team 3.
2. Refer to the connection instructions supplied with your Huntleigh or other
CRS system.