Huntron TRACKER 2700 - Page 5

v
SECTION 7 TESTING INTEGRATED CIRCUITS........................................................ 7-1
7-1. Integrated Circuits............................................................................................................7-1
7-2. Analog Circuits..............................................................................................................7-11
7-3. Low Voltage...................................................................................................................7-16
SECTION 8 MAINTENANCE....................................................................................... 8-1
8-1. Introduction......................................................................................................................8-1
8-2. External cleaning/lubrication...........................................................................................8-1
8-3. Storage Instructions .........................................................................................................8-1
8-4. Service Information .........................................................................................................8-1
8-5. Contact Information.........................................................................................................8-1
SECTION 1
INTRODUCTION AND SPECIFICATIONS
1-1. INTRODUCTION
The Huntron Tracker 2700 and 2700S are versatile troubleshooting tools with the following
features:
• Multiple test signal frequencies (20Hz, 50Hz, 60Hz, 200Hz, 2000Hz).
• Six voltage ranges (200mV, 3V, 5V, 10V, 15V,20V).
• Five resistance ranges (10Ω, 100Ω, 1kΩ, 10 kΩ, 100 kΩ).
• Automatic resistance, voltage, or frequency scanning.
• STAR (Smart Tracker Active Range). Automatic lockout of certain range combinations for
limiting the maximum power output at the test terminals.
• Rate of channel alternation and range scanning is adjustable.
• DC voltage source for testing of three terminal devices.
• LED indicators for button functions.
• Dual channel capability for simple comparison testing.
• Color Liquid Crystal Display (LCD) with easy to operate controls.
• SigAssist
TM
for numeric value indication and range selection.
• Scan and compare up to 40 pins with the Tracker 2700S