Need help?Do you have a question about the hurlcon Filtrite CX Series and is the answer not in the manual?
General| Type | Cartridge Filter |
|---|---|
| Material | Polypropylene |
| Maximum Working Pressure | 250 kPa |
| Operating Temperature | 33°F to 100°F (0°C to 38°C) |
| Housing Material | Polypropylene |
Details on IP rating, ventilation, mounting on brick or post, and power connection.
Correct cell location in pipework, pressure/temperature limits, and critical flow direction.
Connecting the multi-core cable to the cell and ensuring tight connections.
Recommended salt levels, addition method, and pump running for dissolving.
Breaks down the panel into Programming, Chlorine Output, Warnings, and User Mode.
Step-by-step guide to setting the current time and day on the unit.
How to set up to four different operating periods for the chlorinator/pump.
Advice on optimal timer settings for pool sanitization and energy efficiency.
How to adjust chlorine output from 0 to 8 for Pool Mode.
Explains Auto, On, and Standby/Off modes for pool operation.
How to select Spa mode to adjust chlorine production for spa use.
Indicates low salt concentration; advises checking with a pool shop.
Indicates no water flow to cells; suggests checking diagnostics.
Explains how LED lights indicate set point and LCD shows actual output.
Detailed steps for backwashing and rinsing the filter with safety features.
How the unit detects lack of water flow and protects the pump.
Guidance on daily operation for sanitization, with summer/winter variations.
How to check and adjust chlorine levels for optimal pool sanitization.
Recommended levels for Stabiliser, pH, Total Alkalinity, and Salt.
Information on automatic cleaning and manual cleaning procedures for the cell.
Checks for calcium build-up, water chemistry, and cable connections.
Checks for leaks, and insect ingress.
Checks chlorine level, pump hours, and insect prevention.
Potential causes and remedies for 'No Flow' and 'Low Salt' fault indications.
Potential causes and remedies for blank display and low chlorine production.
Potential causes and remedies for the clock losing time when power is removed.
Outlines the express warranty terms, conditions, and limitations for the product.
Procedure for submitting a warranty claim, including required information.
To Next Page