Hurst Jaws Of Life EDraulic S 788 EWXT User Manual (English)

Questions and Answers:

B
Bradley WardAug 1, 2025
What to do if blade arms do not move on my Hurst Jaws Of Life Cutter?
- S
  Shannon LambertAug 1, 2025
  If the blade arms of your Hurst Jaws Of Life Cutter don't move during operation, it could be due to a flat or defective battery. Try charging the battery first. If charging doesn't solve the issue, the battery may need to be replaced. If neither of these steps works, the device itself may be defective and require professional repair by an authorized Hurst dealer or trained personnel.
D
Danielle FrancoAug 6, 2025
Why are the blade arms moving slowly on my Hurst Jaws Of Life Cutter?
- E
  efuentesAug 6, 2025
  If the blade arms of your Hurst Jaws Of Life Cutter are moving slowly or jerkily, the possible causes are a flat battery, a defective battery, or air in the hydraulic system. First, try charging the battery. If the problem persists, the battery may need replacing. If that doesn't resolve the issue, there may be air in the hydraulic system, requiring repair by an authorized Hurst dealer or personnel specially trained by HURST.
J
James JacksonAug 10, 2025
How to restart the motor on my Hurst Jaws Of Life EDraulic S 788 EWXT Cutter?
- B
  Bryan RasmussenAug 10, 2025
  If the motor of your Hurst Jaws Of Life Cutter doesn't start after activating the star grip, especially after the device has been on battery operation and unused for 10 minutes or more, the rechargeable battery may have switched itself off. To resume work, switch off the eDRAULIC device at the mains and then switch it back on. Alternatively, activate the capacity display on the rechargeable battery, or briefly unplug and replug the battery.
L
Lisa EvansAug 14, 2025
Why does my Hurst Jaws Of Life EDraulic S 788 EWXT battery drain so fast?
- E
  Erica LewisAug 14, 2025
  If the operating time between charging cycles is less than 5 minutes for your Hurst Jaws Of Life Cutter, even after following charging instructions, the battery is likely defective and needs to be replaced.