5. Remove stick from shifter assembly. Slide the lower shifter boot over shifter mechanism, leaving
mounting holes exposed for stick. Reinstall the factory lower boot mounting screws and tighten
securely.
6. Reinstall lower and upper console in vehicle and re-connect electrical wiring. Secure console re-
using factory mounting screws.
7. Remove knob from shifter stick, re-install stick to shifter mechanism (be sure to engage serrations)
and tighten securely.
8. Lowering the parking brake handle will re-engage ratchet pawl.
9. Reinstall factory shifter boot on console. Install knob onto shifter stick, turn to desired position and
tighten jam nut against knob. Reconnect the negative (-) battery cable.
IMPORTANT: RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Technical Service
Hurst Performance maintains a highly trained technical service department to answer your technical
questions, provide additional product information and offer various recommendations.
Hurst Performance Products
(866) 464-6553
www.hurst-shifters.com
Technical Support (866) 464-6553 4 www.hurst-shifters.com
To Previous Page
Loading...