Name: Huskee 1083946
Brand: Huskee
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Page 8

ITEM NO. PART NO. DESCRIPTION QTY.

1 40118800 Tank 1

2 O/L 1/2” NC x 4-1/2 Hex Bolt 2

3 O/L 1/2” Lock Washer 2

4 O/L 1/2” NC Hex Nut 2

5 40127200 Tongue Assembly 1

O/L- Obtain locally. Common fasteners available through

hardware and farm stores.

STEP 3: Attach the tongue assembly (5) to the tank assembly (1) using two 1/2” NC x 4-1/2” hex cap bolts (2), two 1/2” l

lock washers (3) and two 1/2” hex nuts (4). Tighten.

STEP 4: Stand the beam (1) up on end. Two people may be needed for this step to ensure safety. Make sure that the

beam is stable and on a level surface.Remove the pivot pin (3) and clip pin (2) from the tank assembly.Roll the

tongue/ tank assembly into position between the two tabs on the beam (1). Slide the pivot pin (3) through the

aligned holes and lock in place with the clip pin (2).

ITEM NO. PART NO. DESCRIPTION QTY.

1 401413S0 Beam 1

2 O/L 1/2”-3/4” R Clip Pin 1

3 071022WC Pivot Pin 1

Questions and Answers:

Need help?

Do you have a question about the Huskee 1083946 and is the answer not in the manual?

Huskee 1083946 Specifications

General