Assembly
Maintenance
1
Caster maintenance
2
Drawer maintenance
□ Grease the casters annually using high-quality
bearing grease.
□ Lubricate the slides semi-annually.
Attaching the casters
1
Attaching the cabinet handle
2
HUSKYTOOLS.COM
5 Please contact 1-888-HD-HUSKY for further assistance.
□ Be sure the drawers are locked and lay the cabinet (A)
□ Attach the swivel casters (D) to the unit, on the same
side as the handle, inserting bolts (AA) through washers
(BB), the swivel casters (D) and into the cabinet (A).
□ Tighten with a wrench (DD).
□ Repeat this process for the
xed casters (C) on the
opposite side of the cabinet (A).
□ Return the cabinet (A) to its upright position.
CAUTION: Do not over tighten the bolts.
BB
□ Position the cabinet handle (B) over the holes on the
cabinet (A).
□ Attach with the bolts (CC) and tighten with a
wrench (DD).
NOTE:
The holes in the cabinet are tapped and do not
require nuts.
A
CC
B
To Next Page
Loading...
