Page 97
User Guide v 1.0 — August 2018 Altanium Neo5
8.3.2 Compare Mode Test Results
When the compare function on the Mold Test Results screen is checked,
the Diagnostics Results screen will show two tables, one above the other. The top table
shows the ’baseline’ results, and the bottom table shows the ’compare’ results. Buttons at the
top of the screen allows the operator to choose the baseline results and compare results from
a list of the tables in the database.
1. In the Mold Test screen, run a diagnostics test. The results are stored in a diagnostics
table.
2. Touch , Mold Test Results and go to the Diagnostics Results screen.
3. In the upper right of the Diagnostics Results screen, press . The Test Results
Title keyboard will be shown.
4. Touch . The diagnostics results table is copied to the new table named Test 1.
5. Touch . In the drop down menu, Select Baseline, select the test that
you want to use as the baseline for the upper table.
To Next Page
Loading...
