Page 121
User Guide v 1.0 — August 2018 Altanium Neo5
13.2 Report Descriptions
This section provides a description of each print report.
Reports will be saved to one of the locations that follow:
• System/Reports folder in the Neo5 hard drive,
• an installed USB device, if configured,
• a shared folder on a network, if configured.
Print Report Type Description
Zone Information — Brief From the Text View screen, the following will be saved to a file:
• Zone Number
• Setpoint and Units
• Actual Temperature and Units
Zone Information — Detailed From the Text View screen, the following will be saved to a file:
• Zone Number
• Zone Name
• Setpoint
• Temperature
• Power
• Amperage
• Leakage
• Regulation Mode
• Alarm Limit
• Abort Limit
• Watts
• Resistance
• Full Load Watts
• Voltage
To Next Page
Loading...
