Page 21
User Guide v 1.0 — August 2018 Altanium Neo5
4.3 Supply Voltage Screen
The Supply Voltage screen displays a graphical view of how the input supply voltage is
wired. A table shows how the zones are connected to the input power.
On the Home screen, select
.
NOTE: The amperage value displayed shows one decimal place for systems with ICC
2
cards
installed and two decimal places for systems with ICC
3
cards installed. Both voltage
and amperage values display “---” if the voltage and amperage is not calibrated for all
the zones associated with a particular phase. The amperage value also displays “---” if
all of the zones associated with a particular phase are XL or HL cards.
The supply configuration is selected on the System Setup screen. The supply voltage can be
wired in four different configurations.
Item Description
Schematic The image is a visual representation of the supply configuration
Zone # Shows what phase pair the zone is connected to
Phase Pair Phase pair label associated with the supply configuration schematic
Volts The voltage value for all the zones associated with a phase
Amps The amperage value for all the zones associated with a phase
To Next Page
Loading...
