1
4 TOOL, 53PCS AIR TOOL KIT
Model No. CAT851
- HVLP Gravity Feed Spray Gun
Part No. QSG001
- 1/2" Impact Wrench
Part No. QIW001
- 3/8" Ratchet Wrench
Part No. QRW001
- 1/4" Die Grinder
Part No. QDG001
Table of Contents
z Specifications
z General Safety Information
z Features & Operation
z Maintenance
z Parts List
z Warranty
Description
The Husky Model No. QSG001 HVLP Spray Gun is designed to provide
equal atomization and particular size for all kinds of surface painting. This
tool features fluid and pattern controls, stainless steel needle and nozzle,
precision air cap set. Provides optimum atomization and excellent
finishes in furniture, automotive, and equipment painting.
Specifications: - HVLP Gravity Feed Spray Gun
Type of Feed: …………………………....……….….……………….. Gravity
Finish Quality: ………………....…………………….….……………….. Best
Orifice Size: ……………………………………..…………... 0.055" (1.4mm)
Pattern Width: …………………..…..….…………..………………. 6.5"~ 10"
Paint Capacity: …………………....…………..……………… 20 Oz.(600cc)
Weight: ……………………………………………..……………….... 1.45 lbs
Overall Length: …………………………………….……………........... 13.5"
Avg. Air Consumption: …………………………..…………... 4.2 ~ 7.1 CFM
Air Inlet: …………………………………….…………….…………. 1/4" NPT
Operating Air Pressure: ………………..………..…..…………. 29 ~ 50 PSI
Description
The Husky Model No. QIW001 1/2" Impact Wrench is designed for
general fastening applications. This tool features a built-in regulator for
convenient power adjustment, a protective rubber nose piece and a
ring-type retainer for quick socket changes.
Specifications: - 1/2" Impact Wrench
Drive Size: ……………………..…………….…………..…………… 1/2"
Max. Free Speed: …..……………………………………….. 7,000 RPM
Max. Torque: …………………………………………………... 260 ft.lbs.
Weight: ………………………………..……………………….... 4.69 lbs.
Overall Length: ………………………..……………………............ 7.12"
Avg. Air Consumption: ………………...…...….….……………… 5 CFM
Recommended Hose Size: …………………………………….. 3/8" I.D.
Air Inlet: ………….………..……………………....……………. 1/4" NPT
Max. Operating Pressure: ….……………..…..…………………. 90 PSI
Description
The Husky Model No. QRW001 3/8" Ratchet Wrench is designed for
a wide variety of fastening applications. This tool features a lever type
throttle for variable speed control, front exhaust directs air away from
operator and a ball type socket retainer for quick and easy socket
removal.
Specifications: - 3/8" Ratchet Wrench
Drive Size: ……………………..…………….…………..…………... 3/8"
Max. Free Speed: …..…………………………….…………… 160 RPM
Max. Torque: …………………………………………................ 45 ft.lbs.
Weight: ………………………………..…………………………. 2.64 lbs.
Overall Length: ………………………..…………………….......... 10.38"
Recommended Hose Size: ……………………..…….............. 3/8" I.D.
Avg. Air Consumption: ………………...…...….….……………… 4 CFM
Air Inlet: ………….………..……………………....……………. 1/4" NPT
Max. Operating Pressure: ….……………..…..…………………. 90 PSI
.
Description
The Husky Model No. QDG001 1/4" Die Grinder is designed for
grinding and deburring operation confined areas.
Specifications: - 1/4” Die Grinder
Collet Size: ……………………..…………….…………..…………... 1/4"
Max. Free Speed: …..……………………………………… 22,000 RPM
Weight: ………………………………..…………………………. 1.17 lbs.
Overall Length: ………………………..……………………............ 6.88"
Recommended Hose Size: ……………………..…….............. 3/8" I.D.
Avg. Air Consumption: ………………...…...….….……………… 6 CFM
Air Inlet: ………….………..……………………....……………. 1/4" NPT
Max. Operating Pressure: ….……………..…..……………….… 90 PSI
Operation & Parts Manual
Sold Exclusively at The Home Depot
2455 Paces Ferry Road, N.W. Atlanta, Georgia 30339
To Next Page
Need help?
General
